Flowserve SPECTORcontrol Manuale Utente Scaricare il pdf (Pagina 47)

Controller Menu – continued –

Continuous controller

1. Press button in the menu Continuous controller setup.

2. The menu Continuous controller is

password protected. Press button and

enter your password.

3. The name of the controller is highlighted in

yellow. Below that the current actual value,

the setpoint as well as the current control-

ler position are indicated.

4. To change the internal setpoint click in

the green input field.

5. The current value appears in the input

mask. Use the on-screen keyboard to

overwrite or modify the value.

6. When you switch to manual operation you can enter a manipulated variable in the

input field Manual. For this purpose click in the green input field.

7. The current value appears in the input mask. Use the on-screen keyboard to over-

write or modify the value.

8. Use the button to activate either automatic operation, off or manual operation. The

adjusted mode of operation will be indicated by a larger icon next to the button.

9. Use the input fields P (proportional), I (integral) and D (differential) to enter the control

parameters of the PID controller.

10. The current value appears in the input mask. Use the on-screen keyboard to over-

write or modify the value.

11. Below the status indicator Enabled/Disabled and the adjusted controller the actual

value (X), the setpoint (W) and the manipulated variable (Yx) as well as the position

feedback (Yx) are graphically represented in the form of a bar chart.

Continuous

Logo

Controller 1

Actual

Enabled

TEST 2

0.0 %

0.0

0.0NC

0.0

Int. setpoint

Position

Manual:

Note

In this menu only an internal setpoint can be established.

If you change the switch setting from automatic operation to Off, the current

manipulated variable (Yw) of the controller will appear in the field Manual.

If the controller features an external setpoint element that is defective, the

internal setpoint will become active and can be adjusted.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 87 88

Commenti su questo manuale

Nessun commento

Flowserve SPECTORcontrol Manuale Utente Pagina 47

Commenti su questo manuale

Prodotti e manuali riguardandi Hardware Flowserve SPECTORcontrol